The perfect cartridge replacement for your Allshot Airbag vest. We offer SafeKid and Belair replacement cartridges.
Sizing Chart:
The CO2 cartridge can be easily and quickly replaced. The system can be reactivated by yourself within a few minutes without any special knowledge required. The size of the cartridge is proportional to the size of the airbag. One cartridge is always included with your airbag. We recommend you buying an extra cartridge to have as a spare in case of a fall.
PLEASE NOTE: For safety reasons, we ask you to check your airbag on an annual basis (Annual Maintenance):
Unscrew and weigh your CO2 cartridge on a scale. Please make sure it is approximate +/- 3g for 30CC and 60CC & 85CC cartridges to the weight written on your cartridge (ALLSHOT sticker on the cartridge).
Please find below some precautions for your cartridges:
-
Use only ALLSHOT brand cartridges.
-
The cartridge is for single use only. You must replace the cartridge with the same type after each inflation.
-
If rust or other corrosive marks appear on the outer surface of the cartridge, please change it immediately and contact us. (We have to verify the mechanical component of the vest to ensure the safe deployment of the airbag).
-
The cartridge should be stored and used in temperatures below 45°C.*Do not expose the full cartridges for a long time to high temperatures (in direct sunlight, near a radiator, etc.).*
-
The cartridge must be used at a temperature over 0°C. If stored under 0°C, warm up before use or replace it with a cartridge stored at room temperature.
-
Avoid shocks to the cartridge, this could damage it.
-
The used or damaged cartridge will have to be recycled or disposed of in accordance with your country’s legislation.
